AIS Router AI2524 Bedienungsanleitung PDF herunterladen (Seite 271)

100

101

Chapter 12: AI2524 X.25 Configuration Steps

August 1997 Page 12-13

2524UM

Disable Packet-Level Protocol (PLP) Restarts

By default, a PLP restart is performed when the link level resets (for

example, when LAPB reconnects). Although PLP restarts can be dis-

abled for those few networks that do not allow restarts, do not disable

these restarts because doing so can cause anomalous packet layer be-

havior.

In interface configuration mode, disable PLP restarts:

no x25 linkrestart

Configure an

X.25 Datagram

Transport

X.25 support is most commonly configured as a transport for data

grams across an X.25 network. Datagram transport (or encapsulation)

is a cooperative effort between two hosts communicating across an

X.25 network. You configure datagram transport by establishing a

mapping on the encapsulating interface between the far host's protocol

address (for example, IP) and its X.121 address. Because the call iden-

tifies the protocol that the virtual circuit will carry (in the CUD field),

the terminating host can accept the call if it is configured to exchange

the identified traffic with the source host.

Figure 12-1 illustrates two routers sending datagrams across an X.25

public data network (PDN).

Figure 12-1: Transporting LAN Protocols across an X.25

Public Data Network (PDN)

1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 417 418

Kommentare zu diesen Handbüchern

Keine Kommentare

AIS Router AI2524 Bedienungsanleitung Seite 271

Kommentare zu diesen Handbüchern